 |
|
Mono-Brace is easy to store, transport and use. The bracing system is self contained. All parts are attached to the frame. It folds into itself so there are no parts to lose... no sorting or assembly required.
|
|
|
Set up and tear down takes only minutes. The brace has an adjustable built in spikeable walkway with a storable safety rail bracket required by OSHA. The walkway ledge allows for a kick-plate safety board.
|
|
|
|
Quick Installation
|
Locking toggle pins make for quick, easy adjustment & installation. Big dollar savings for the contractor, installer.
|
|
|
Easy Set Up and Adjusting
|
More profit through reduced installation costs.
Easier to handle, plumb and store.
|
|
|
Safer Installation
|
Reduces the risk of lost time accidents.
Safety rail bracket is included.
|
|
|
Meets OSHA and CSA Standards
|
Reduces liability and complies with the latest standards.
Third party engineering report available upon request.
|
|
|
One Piece, Telescoping, Self Contained Package
|
No lost parts or delays in installation. Saves you space. Easy to move and handle.
|
|
|
Fully Adjustable
|
Micro & macro adjustment make installation accurate & efficient. Adjustable platform.
|
|
|
Integrates with Buck ScaffoldingBuilt
|
Works on high wall with readily available cost effective Buck Scaffolding.
|
|
|
Built to Last
|
Mono-Brace is designed, engineered, manufactured, galvanized and powder coated for long life.
|
|
|
| Item No. |
Description |
Dimensions |
Weight |
| MB8 |
8ft. Telescopic Foldaway ICF Bracing System
complete with safety rail* |
8' x 5" x 2.75" |
58 lbs. |
| MB9 |
9ft. Telescopic Foldaway ICF Bracing System
complete with safety rail* |
9' x 5" x 2.75" |
61 lbs. |
| MB10 |
10ft. Telescopic Foldaway ICF Bracing System
complete with safety rail* |
10' x 5" x 2.75" |
65 lbs. |
| MB12 |
12ft. Telescopic Foldaway ICF Bracing System
complete with safety rail* |
12' x 5" x 2.75" |
72 lbs. |
*Platform rating 50lbs per square foot, handrail rated for 200lb point load as required by OSHA. Brace rated 10lbs per square foot lateral wind load.
Patent No. 6,065,254
|
 |
|
Mono-Brace offers a variety of ways to construct an I.C.F. wall. First, by itself, spaced at intervals of 5 to 6 feet but can be used up to eight feet apart. Second, on Buck Scaffolding, and third, using one on top of another, bolted together. A is the standard approach to I.C.F. Wall Construction. It is in the open, ready to use position. (In these figures we have added a ten foot scale next to the brace). No other parts are needed. The ten foot Mono-Brace System is spaced evenly across the wall. B shows the ledge at the top folded into the frame and another ledge is placed at the bottom of the frame as a riser. This is accomplished by an optional ledge kit, or the use of one ledge from another unused brace. The height of the brace can be increased by bolting it to the top of another brace. C Mono-Brace can be used on top of regular Buck Scaffolding for pouring in sections. After the pour is plumb and cured, the brace can be removed and Buck Scaffolding placed in position. Next, Mono-Brace can be placed on top of the Buck Scaffolding to construct the next tier of I.C.F. block. Mono-Brace frame and foot are designed to accommodate the scaffolding post where the Buck Scaffolding is joined together as seen in C. This is done by placing Mono-Brace over the 1-5/8 inch diameter neck posts on either end of the Buck Scaffolding using the holes provided on the brace. No other attachments, out rigging or fixtures are required. Mono-Brace is then secured to the foot plate and Buck Scaffolding. We recommend
the use of U-Bolts in the holes provided in the brace. Then continue to use the Mono-Brace System as before.The Mono-Brace System can be used in many different configurations to best suit various building requirements. Everything you need is included and stored in the brace. Please Note: Only experienced, qualified, trained professionals should use the Mono-Brace System and other related products on any construction project.
|
|
|
|
|
