DRIER. FROM THE GROUND UP. Fastfoot® is a fabric footing form that prevents rising damp. Stakes are driven into the ground, 2x4 screed boards attached at the correct height, and Fastfoot® is stapled to each 2x4 to form and protect the concrete from ground moisture. I - Fastfoot® used as a complete footing form Fastfoot® can be used as a complete footing form, forming the sides and base of the footing as shown below: Fastfoot® - forms the complete footing II - Fastfoot® used as an edge form Fastfoot® can be used as an edge form, forming the sides only. Fastfoot® edging is used where the footing (or slab) is too wide to be formed with a single width of fabric. Fastfoot® as edge form Forms one side of the footing BENEFITS Prevents rising damp by providing a wicking break between the footing concrete and the damp ground, reducing mold and mildew Fast to install, less expensive than forming with lumber Lightweight - 120' of fabric weighs only 12.4 lbs.  Adapts to uneven ground  No forming lumber  Less concrete, no leakage  Better concrete quality  In summer, prevents rapid desiccation of concrete  In winter, prevents contamination of concrete with mud and water  Stay in place form, no stripping of fabric  No concrete damage to 2x4s, stakes  No leaching of concrete contaminates into ground and water table For Fastfoot® sizes, click here. For the Fastfoot® Brochure, click here. (PDF)