Engineering Tables

U.S. Engineering Tables

	Table #	Description	PDF	Last Revised
	1-A through 1-F	High Wind Load Reinforcement Requirements for 4" ICF Walls		1/2009

Note: Unless otherwise specified, all BuildBlock wall designs are mandated by ACI-318. All final design is the responsibility of the project specific engineer of record.

Canadian Engineering Tables

Download All tables (PDF) File Size 9.27 MB

Download individual tables:

	Table #	Description	PDF	Last Revised
	1-A	Vertical Reinforcement for 6" (150mm) and 8" (200mm) Below Grade Walls in Seismic Zones 0, 1 & 2		11/2007
	1-B	Vertical Reinforcement for 6" (150mm) and 8" (200mm) Below Grade Walls in Seismic Zones 3 & 4		11/2007
	1-C	Vertical Reinforcement for 6" (150mm) and 8" (200mm) Below Grade Walls in Seismic Zone 5		11/2007

 

	Table #	Description	PDF	Last Revised
	2	Reinforcement for Above Grade Walls In All Seismic Zones		11/2007

 

	Table #	Description	PDF	Last Revised
	3-A	Reinforcement in Above Grade 4", 6", and 8" Walls NBC 1995 / OBC 1997		11/2007
	3-B	Reinforcement in Above Grade 4", 6", and 8" Walls NBC 1995 / OBC 1997		11/2007
	3-C	Reinforcement in Above Grade 4", 6", and 8" Walls NBC 1995 / OBC 1997		11/2007

 

	Table #	Description	PDF	Last Revised
	4-A	Minimum Steel Reinforcement for Lintels in 150mm (6") Walls		11/2007
	4-B	Minimum Steel Reinforcement for Lintels in 200mm (8") Walls		11/2007

 

	Table #	Description	PDF	Last Revised
	5-A	Below Grade 150mm (6") and 200mm (8") Walls - Vertical Reinforcement Based on NBC / OBC 9.15.4.5 Without Brick Ledge		11/2007
	5-B	Below Grade 150mm and 200mm Walls - Vertical Reinforcement Based on NBC / OBC 9.15.4.5 Without Brick Ledge		11/2007
	5-C	Below Grade 6" and 8" Walls - Vertical Reinforcement Based on NBC / OBC 9.15.4.5 Without Brick Ledge		11/2007

 

	Table #	Description	PDF	Last Revised
	6-A	Below Grade 6" Walls with Brick Ledges Maximum Weight of Brick Veneer (lb/ft)		11/2007
	6-B	Below Grade 150 mm Walls with Brick Ledges Maximum Weight of Brick Veneer (kN/m)		11/2007
	6-C	Below Grade 6" Walls with Brick Ledges Maximum Weight of Brick Veneer (lb/ft)		11/2007

 

	Table #	Description	PDF	Last Revised
	7-A	Below Grade 8" Walls with Brick Ledges Maximum Weight of Brick Veneer (lb/ft)		11/2007
	7-B	Below Grade 200mm Walls with Brick Ledges Maximum Weight of Brick Veneer (kN/m)		11/2007
	7-C	Below Grade 8" Walls with Brick Ledges Maximum Weight of Brick Veneer (lb/ft)		11/2007

 

	Table #	Description	PDF	Last Revised
	8-A	Reinforcement in 6" and 8" inAbove Grade Walls NBC 2005 / OBC 2006 Subsection 9.20.17		11/2007
	8-B	Reinforcement in 6" and 8" Above Grade Walls NBC 2005 / OBC 2006 Subsection 9.20.17		11/2007
	8-C	Reinforcement in 6" and 8" Above Grade Walls NBC 2005 / OBC 2006 Subsection 9.20.17		11/2007

 

	Table #	Description	PDF	Last Revised
	9	Taper Top Reinforcement		11/2007